NAME: FINISH V16.
GROUP: transpiring acrylic protective
UTILISATION: transparent paint for indoor and outdoor . Formulated and tested for the protection of Klondike Ferro.
TECHNICAL DATA:
Specific weight: 1.000 + 30 gr/LT. at 25°C (ISO 2811-1)
Viscosity: 250 cps (EN ISO 2555)
Yield: 5-6 sqm 2 coatings for Klondike Ferro (not diluted)
Aesthetic effect: mat
Colours: transparent
DRYING TIME:
On the surface: 30 minutes at 20°C
2nd coat: 2 hours at 20°C
On depth: 24 hours at 20°C
CARACTERISTICS AND RESISTANCE: to stop oxidation, but also to ensure that the surface does not get dirty at the touch and to make it moderately washable, apply two coats of Finish V16.
APPLICATION:System: by brush, by roller, by spray
Coats: 1 - 2 (with 2 coatings it verges on becoming glossy)
APPLICATION CYCLE: apply two coats of Finish V 16 at a 2-hour interval at 20°C. Finish V 16 must be used at least 1 - 2 days after the decoration, but also depending on the desired oxidation intensity. Nonetheless, the oxidation will havecompleted its reaction after 8 - 10 days at 20°C. Finish V 16 must be applied using a woollen roller with strokes in all directions, on a surface decorated with the Oxidised Effect or Copper Oxide Effect; with the Oxidised Galvanised Effect, instead, it must be applied with vertical strokes.
Application temperature: between +5°C and +30°C.
Storage: make sure the tin is tightly closed, even after use, and stored at a temperature no lower than +10°C and no higher than +30°C.
Stability: approximately 1 year, if well sealed and never opened
NOTES: Mix carefully before use. Wash the tools soon after use with water and soap.