NAME: PRIMER 400 Bianco
TYPE: White water-based paint.
USE: Water-based primer for interior. Easy to apply.
COMPOSITION: Special resins and charges which allow transpirability.
CHARACTERISTICS:
Specific Weight: 1.420 ± 30 gr/LT. at 20°C (ISO 2811-1)
Yield: 11 - 12 m2/LT. one coat for Valrenna
Stability: 24 months, stock between +5°C and +30°C.
Colours: white and coloured.
DRYING:
On The Surface: 2 hours at 20°C.
Overpainting: 2 - 4 hours at 20°C.
In Depth: 24 hours at 20°C.
CHARACTERISTICS AND RESISTANCE: Primer 400 is a water-based product endowed with particular characteristics which make it similar to a solvent – based product as for instance its penetration in the surface. PRIMER 400 is easy to apply, is washable and remains strong, and it has an excellent coverage. It may be applied to many different surfaces, for example cement, plaster, plaster of Paris, plasterboard, wood, iron PVC and even surfaces that have already been painted (provided that the existing coat is not peeling). PRIMER 400 is excellent as a top coat of paint both indoors and outdoors and no fixative paints are needed.
PREPARATION OF THE PRODUCTS:
Dilution: dilute with water at 10 - 20%
APPLICATION:
System: by brush, by roller, by spray.
Number of Coatings: 1 or more coatings.
PREPARATION OF THE SURFACE:
FOR VALRENNA: Old Surfaces. Remove old non- adhering and peeling paint, then wash using water and suitable soap products. Next, use a filler to repair the surface. When drying is complete, sand the surface. Then apply PRIMER 400 to the filled parts only. After approximately 4 hours at 20°C, apply a coat of PRIMER 400 coloured and diluted 10 - 20% with water. If, however, the surfaces are clean and not peeling, apply a covering coat of PRIMER 400 coloured and diluted 20% with water or 10- 20% for Valrenna 2 . After 4 hours at 20°C, proceed with the application of VALRENNA.
New Surfaces: Use a filler to repair the surface. When dry, sand and apply PRIMER 400 to the filled parts only. After approximately 4 hours at 20°C, apply a coat of PRIMER 400 coloured and diluted 20% with water or 10-20% for Valrenna 2 . After 4 hours at 20°C, proceed with the application of VALRENNA
Application temperature: superior to +5°C and inferior to +30°C.
Storage: make sure that the can is tightly closed, even after use, and store at a temperature between +10°C and +30°C. Keep away from freezing.Stability: approximately 2 year, if the containers are well sealed and never opened.
NOTES: Mix well before its use. Tools must be cleaned soon with water and soap after use.